[pianotech] difficult action removal

jere fryett jerefryett at hotmail.com
Thu Dec 31 10:55:32 MST 2009


List,

 

I have a client with a Lowrey console.  There is a rubbery squeak when she uses the sustain pedal.  I believe it is coming from the center of the action and that the damper rod is the culprit.  My problem is that I cannot get the action to pull off the action bracket bolts.  The down pressure of the bolts on the bracket saddles is so excessive that I cannot move the action.  I am afraid if I were to succeed in removing the action that I would not be able to replace it.  Have any of you had this problem and, if so, what was your solution. The lady just bought this piano from a store and she is greatly upset by the squeak.

 

Thanks for your help.

 

Jere
 		 	   		  
_________________________________________________________________
Hotmail: Free, trusted and rich email service.
http://clk.atdmt.com/GBL/go/171222984/direct/01/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091231/809e02b7/attachment.htm>


More information about the pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC