My wrists tend to get tired pinching cloth or scotch-brite pads over the course of 60 odd damper wires, so I'm always looking for an easier way. So, I found another use for scrap hammer felt. Just drill a small hole through the scrap, add Flitz, and polish. No squeezing, just a few glide back and forth, then a wipe off - nice and shiny. Yahoo, I'm satisfied. William R. Monroe -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_1495.JPG Type: image/jpeg Size: 29915 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090209/da70b8b2/attachment-0003.jpe> -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_1496.JPG Type: image/jpeg Size: 33796 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090209/da70b8b2/attachment-0004.jpe> -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_1498.JPG Type: image/jpeg Size: 34571 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090209/da70b8b2/attachment-0005.jpe>
This PTG archive page provided courtesy of Moy Piano Service, LLC