I've done the same thing. Removing the screw may or not save time, but if the screw broke, or the bar cracked, or, or, or. Just replace the string again and chalk it up to experience. On Thu, Feb 12, 2009 at 7:05 PM, Brian Doepke <bdoepke at verizon.net> wrote: > When replacing a broken string on a console, I accidentally threaded the new > string under the pressure bar but on the wrong side of one of the screws > that hold down the pressure bar. > > > > Can I remove the screw and then slide the string over and then replace the > screw? > > > > Brian P. Doepke, RPT > > A.A.A. Piano Works, LLC > > Piano Tuning + Service > > -- Regards, Jeff Deutschle Please address replies to the List. Do not E-mail me privately. Thank You.
This PTG archive page provided courtesy of Moy Piano Service, LLC