Thanks, everyone for your suggestions. I found some components at Grainger that will do nicely. Making my own out of wood would be a hassle in my very limited work space. Barbara Richmond ----- Original Message ----- From: "Delwin D Fandrich" <del at fandrichpiano.com> To: pianotech at ptg.org Sent: Tuesday, February 24, 2009 11:03:21 PM GMT -06:00 US/Canada Central Subject: Re: [pianotech] workbench Go to: http://www.grainger.com/Grainger/wwg/productIndex.shtml?L2=Legs&operator=prodIndexRefinementSearch&originalValue=Workbench&L1=Workbench M ost any of them will do and they probably have a store near you. I've used these in the past--they are tough, give you a bit of room for your legs if you're sitting on a stool and, at about $62 the pair, they are reasonably cheap. Workbench Leg,Pk2 Or, if you want something adjustable, try these (they are about the same price): Workbench Leg,Pk2 ddf -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090225/1d7728c6/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC