Yamaha. Also try lifting the whippen to do the adjustment. Sometimes that works. Joseph Alkana _____ From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of KeyKat88 at aol.com Sent: Wednesday, February 25, 2009 4:20 PM To: pianotech at ptg.org Subject: [pianotech] regulation tool : too wide Greetings, Going to make the adjustment of jack to knuckle, I find the neck/shank of the screw adjustor tool, too big in diameter to fit between the let-off buttons. The let-off buttons on this Young Chang grand are the dowel type. I've tried slipping the tool's shank from the bottom up, in-between the let-off dowels, but geesh, there's just no room! Is there a better tool for this? If so, who sells it? Julia Gottshall Reading, PA _____ Get a jump start on your taxes. Find <http://yellowpages.aol.com/search?query=Tax+Return+Preparation+%26+Filing&n cid=emlcntusyelp00000004> a tax professional in your neighborhood today. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090225/d01e9061/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC