Can you measure them?? Just curious ? makkes sense to have different sizes ? Dale -----Original Message----- From: pianolady50 at peoplepc.com To: pianotech at ptg.org Sent: Fri, 27 Feb 2009 1:02 pm Subject: Re: [pianotech] Erwins key dip gauge Yep, the ends are different sizes.? One is brass the other aluminum for quick visual reference while using.? I haven't used one in a while and can't, for the life of me, remember each end's diameter.? Having the double end also makes for a nice handle and better balance. ? Debbie L. ----- Original Message ----- From: erwinspiano at aol.com To: pianotech at ptg.org Sent: Friday, February 27, 2009 11:41 AM Subject: Re: [pianotech] Erwins key dip gauge HI Debbie ?Very similar & douple ended. Are these different diameters? ? Dale ? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090227/622bae3b/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC