The .370" just forward of the front rail pin will be more than .370" at the front of the key. I dunno how much. Paul Bruesch Stillwater, MN On Sat, Feb 28, 2009 at 7:45 AM, jim ialeggio <jimialeggio at gmail.com> wrote: > Dale, > > > What an elegantly simple idea. > > In using one of these; is there a reason to go with .370 dimension rather > than the full .390...other than the fact that .370 can be had off the shelf, > and you need a lathe to get to .39? Seems like .39 would skip the shim bit > which always seems to turn out to be an exercise in inefficiency. > > On the other hand .370 allows the tool to be used in various > gradations....? > > Jim > >> >> >> ------------------------------ >> Looking for work? Get job alerts, employment information, career advice >> and job-seeking tools at AOL Find a Job<http://jobs.aol.com/?ncid=emlcntuscare00000001> >> . >> > > > > -- > grandpianosolutions.com > Shirley, MA (978) 425-9026 > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090228/4a7d0d5a/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC