>> I know that you stipulated that under $1000 would be nice, and >> these are going to push you over that amount. Safety is important, >> though, and the Grizzly G0696 is only $1250. Of course I haven't >> used it, but I know from experience that the (non-riving knife) >> G1023 that precedes it is a quality saw, so I expect that the G0690 >> should be well-designed and made. 603 lbs. of (mostly) cast iron.... >> Joe DeFazio >> Pittsburgh > > The G0661 is also cast iron, has a riving knife, and is within the > specified budget. > > Ron N Thanks for pointing that out, Ron. I guess I devoured the new Grizzly catalog a little too hastily - missed some of the capers and cranberries in search of the really juicy stuff.... -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090104/d9b3f222/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC