[pianotech] Free Sample kit: Buttons, Glue, Mortise Inserts

[Mike Morvan]

Gene,
    Thank you for your inquiry, we will get a sample kit out to you.   Mike
Blackstone Valley piano
Michael A. Morvan
76 Sutton Street
Uxbridge, Ma 01569
(508) 278-9762
www.pianoandorgankeys.com
www.thepianorebuilders.com
  ----- Original Message ----- 
  From: Gene Nelson 
  To: pianotech at ptg.org 
  Sent: Tuesday, January 06, 2009 11:01 AM
  Subject: Re: [pianotech] Free Sample kit: Buttons, Glue, Mortise Inserts


  Hello Mike,
  I am interested in mortise inserts for sharps.
  Will need to replace several on current project and was putting off the job wondering how to go about it.  Front pins are .145
  Regards,
  Gene Nelson
  5585 Dragon Springs Road
  Placerville Ca 95667
    ----- Original Message ----- 
    From: Mike Morvan 
    To: pianotech 
    Sent: Tuesday, January 06, 2009 6:18 AM
    Subject: [pianotech] Free Sample kit: Buttons, Glue, Mortise Inserts


    List,
        We have put together a sample kit of our buttons, mortise inserts and glue. (see pictures below) If interested send me an email with your address and we will get one out to you.
    Our buttons and mortise inserts are CNC Machined with incredible accuracy and repeatability. They are available  bushed or unbushed. These are not the "one size fits all buttons", and they are bushed by hand with hot hide glue.
    The buttons come in three different sizes designed to fit the following pins:
    0.125, 0.129, 0.133
    0.137, 0.145, 0.152
    0.160

    We also make custom buttons in which the mortises are at angles (used on a lot of domestic grands) and we make buttons for the 0.087 pin found on older domestic makes. See picture below.

    The mortise inserts come in two different sizes designed to fit the following pins:
    0.125, 0.129
    0.145
    View our website for a slideshow on mortise insert application.

    The glues are our own plastic glue (for gluing acrylic, styrene and mineral plastic) which is similar to PVC-E but is more viscous, stronger and DRIES WHITE and our glue for new ivory and bone. Both glues can be used to glue down restoration ivory as long as the original protein glue is removed from the keytop and the keystick.

    We also just made and delivered a set of RC&S soundboard cauls for a bellyman in New England and they could not believe we were able to give them the exact curvatures they wanted in all dimensions.

    Thanks, Mike

    Blackstone Valley piano
    Michael A. Morvan
    76 Sutton Street
    Uxbridge, Ma 01569
    (508) 278-9762
    www.pianoandorgankeys.com
    www.thepianorebuilders.com


    ANGLED BUTTONS

    MORTISE INSERTS AND STRAIGHT BUTTONS

    MORTISE INSERTS INSTALLED
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090106/b01ca7f8/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 23381 bytes
Desc: not available
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090106/b01ca7f8/attachment-0003.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 33112 bytes
Desc: not available
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090106/b01ca7f8/attachment-0004.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 31209 bytes
Desc: not available
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090106/b01ca7f8/attachment-0005.jpe>