[pianotech] Handling wire w/ talcum powder

[Will Truitt]

Yeh, and don't ask me to be an apprentice in YOUR shop... J

 

Will Truitt

 

From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of David Ilvedson
Sent: Friday, January 09, 2009 7:36 PM
To: pianotech at ptg.org
Subject: Re: [pianotech] Handling wire w/ talcum powder

 

I doubt if cutting some fingers off is going to give you more
dexterity...'-]

 

David Ilvedson, RPT
Pacifica, CA 94044

  _____  

Original message
From: "Jon Page"  
To: pianotech at ptg.org
Received: 1/9/2009 1:56:35 PM
Subject: Re: [pianotech] Handling wire w/ talcum powder

Use powdered rosin for the ends of the pins and cotton gloves (gardening
variety)

cut some fingers off for dexterity and a leather sleeve for the thumb to
form the coil.

   

-- 


Regards,

Jon Page

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090109/2debb895/attachment.html>