[pianotech] repin CA'd pinblock

[Al Guecia/AlliedPianoCraft]

Bruce,

I do it by hand with what I call soft hands. I let the reamer or drill bit 
find it's way down the hole. After a few holes you will get the feel of it. 
Start in the treble where it is less critical.

Al


--------------------------------------------------
From: "Bruce Browning - The Piano Tuner" <justpianos at our.net.au>
Sent: Sunday, January 11, 2009 6:29 PM
To: <pianotech at ptg.org>
Subject: Re: [pianotech] repin CA'd pinblock

> Al,
> Do you do this with drill held by hand, or mounted somehow over plank?
> Bruce Browning
> The Piano Tuner.
>
>
> "was to ream
>> the TP holes with the proper size reamer for the new TP I am going to 
>> use.
>> I do this to clean the hole and for uniform tightness with the new tuning
>> pins."
>
>
>