[pianotech] Accu-Tuner

[Carl Teplitski]

Thank you for your response Paul.   What I want to do is get one pronto.
This will allow me to send mine to Inventronics for general repair.  I would
then own " TWO."  I really don't like the idea of worrying about a breakdown
when I need it .  Here I am with work to do, and I have to send it away.  Sounds
like the turn around time is fairly short, but not instant.  I also sent an Email to
Inventronics for advice, and hope they return with same soon. If you have further
advice, I would be happy to hear from you.

Thanks again.

Carl ( in cold Winnipeg )


From: Paul McCloud 
  To: pianotech at ptg.org 
  Sent: Wednesday, January 21, 2009 10:53 PM
  Subject: Re: [pianotech] Accu-Tuner


  Hi, Carl:
      Are you looking to replace it, or just have one to use in the meantime?  It would be much cheaper to have it repaired (or is it too far gone?).  Just curious..
      Paul McCloud
      San Diego


    ----- Original Message ----- 
    From: Carl Teplitski 
    To: Pianotechlist
    Sent: 01/21/2009 8:46:04 PM 
    Subject: [pianotech] Accu-Tuner


    Hello list.     Am looking for a used Accutuner ll, as mine seems to need some work.

    Please let me know privately at,   koko99 at shaw.ca

    Thank you.

    Carl / Winnipeg
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090122/3e3a7376/attachment.html>