Don, Outstanding compendium of information for us. Only thing I see absent is a comment on damper mass. I'd love to see your opinion on this and perhaps some additional information on your experience re-dampering older actions in this regard. Thank you for a most enlightening tome. Joseph Alkana _____ From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Don Mannino Sent: Saturday, January 24, 2009 9:09 AM To: pianotech at ptg.org Subject: Re: [pianotech] Bobbling hammers and jack spring pressure? As some have already found, this problem comes from the style of action design combined with the regulation of the action, especially the damper spring tension and damper timing. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090124/5da5cecd/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC