Did it look like this? http://www.woodcraft.com/family.aspx?FamilyID=555&refcode=05INFROO Lie Nielsen chisel plane. Wonderful tool. Mike Al Guecia/AlliedPianoCraft wrote: > Thanks for the information Ron. When I worked at Steinway in the > Regulating department, we had a nose plane. It was a good size plane > with the blade up front with no frame in front. I haven't seen one > since. It came in very handy preparing the key bed. Unfortunately it > was company property. That would be a great tool for reduce the > thickness of the panel perimeter around the edge. Tried a Google > search but could find anything like it. > > Al > > > > -------------------------------------------------- > From: "Ron Nossaman" <rnossaman at cox.net> > Sent: Sunday, January 25, 2009 6:22 PM > To: <pianotech at ptg.org> > Subject: Re: [pianotech] Diaphragmizing > >> Al Guecia/AlliedPianoCraft wrote: >> >>> <snip> Rebuilding with an existing board, thinning the bass (or >>> channeling like Overs and Seiler) can be very worthwhile. >>> >>> Can you explain how you do that? >>> >>> Al >> >> Ron O has a photo on the opening page of his website >> http://www.overspianos.com.au/ showing the soundboard with a channel >> routed around the inner rim in the bass, thinning the panel >> perimeter. This is a laminated panel, so tapering it wasn't a >> reasonable option. The channel did the trick very nicely. >> >> Another approach, on a solid panel, is to plane, chisel, grind, gnaw, >> or otherwise reduce the thickness of the panel perimeter around the >> edge of the bass, tapering it back to full thickness in the middle. >> If you have sufficient back scale length in the bass to make it worth >> the trouble (since you already have the plate out), it should help >> bass response noticeably. If you have the classic 40mm back scale on >> A-0, don't bother. >> >> Ron N >> >> > >
This PTG archive page provided courtesy of Moy Piano Service, LLC