Yes, I deduced that myself upon reading. Thanks anyway. Will From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Bruce Dornfeld Sent: Wednesday, January 28, 2009 11:09 PM To: pianotech Subject: Re: [pianotech] Young Chang Growing Brackets Will, You say the let off buttons are straight. That means that you have the newer design and the spread should be set at 113.5 mm. That was probably clear from Jerry's message, but just in case... Bruce Dornfeld, RPT bdornfeld at earthlink.net North Shore Chapter -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090129/ed17af65/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC