Anyone who plans to do this should look carefully at the fences that Fenton uses to control a fairly long length of pinblock. I saw an ugly accident when a short section of pinblock got snagged on the plug cutter, spun around and cut the operator's finger to the bone. Ed Sutton ----- Original Message ----- From: "Fenton Murray" <fmurray at cruzio.com> To: <pianotech at ptg.org> Sent: Friday, January 30, 2009 12:21 AM Subject: Re: [pianotech] Journal Article > More on the photo, after cutting a row of plugs, I rip off the row on the > band saw and start drilling my next row of plugs. > Fenton > -------------- next part -------------- A non-text attachment was scrubbed... Name: PlugCutting.jpg Type: image/jpeg Size: 56774 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090130/e29fea14/attachment-0001.jpg>
This PTG archive page provided courtesy of Moy Piano Service, LLC