HI Todd: Tell them that you spoke with your adviser Mr. Forest Gump, whose words were, "Stupid is, as Stupid does." Will Truitt From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of J Patrick Draine Sent: Wednesday, July 01, 2009 5:49 PM To: pianotech at ptg.org Subject: Re: [pianotech] Flippin a Truck Flipping the truck is, I think, a really bad idea. A platform (very solid I hope!) is a reasonable approach. Is the minister eager to "compete" with the pianist for the congregations' attention? Church politics ... good luck! Patrick On Wed, Jul 1, 2009 at 5:27 PM, Matthew Todd <toddpianoworks at att.net> wrote: Greetings, There is a church with a 7'0'' Baldwin. It is currently sitting on a truck in the front of the sanctuary. There is no room to put it on the stage, so it is sitting in front of the stage on the main floor. Some men in the church are deciding to take the truck and flip it over, so the piano will sit taller. The music minister does not like that idea and has volunteered to build a platform for the piano instead, but others like the idea of flipping the truck, so the piano will gain approx. 8''. Knowing that the trucks are not designed to use upside down, has this been done before, successfully?? Thanks in advance! TODD PIANO WORKS Matthew Todd, Piano Technician (979) 248-9578 http://www.toddpianoworks.com <http://www.toddpianoworks.com/> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090701/8972c470/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC