A tiny dab of white glue on the bridle tape hole with a toothpick might do wonders! This works well for old rattling tapes that are still intact, but noisy. On Wed, Jul 1, 2009 at 1:52 PM, David Nereson <da88ve at gmail.com> wrote: > Has anybody replaced the "stupid"-type bridle wires (where the strap can > slide down the wire if the hole in the tab gets enlarged) on some Baldwin > verticals with "real" bridle wires? What's an efficient way of pushing the > new ones in (into the same wippens)? The new wires have fluted, not > threaded ends. I'm wondering if it can be done without unscrewing all the > wippens from the action. > --David Nereson, RPT > -- Ryan Sowers, RPT Puget Sound Chapter Olympia, WA www.pianova.net -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090701/e59cf21f/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC