[pianotech] Monkey Help Needed (correction)

[Keith McGavern]

Sorry about that edit, Ed. It should have read like this:

> On Jul 5, 2009, at 5:22 AM, Keith McGavern wrote:
> Carman, List,
>
> After what has been said thus far, it appears your idea should  
> satisfy the situation. If it doesn't, you're no worse off having  
> tried.
>
> Keith
>
> On Jul 4, 2009, at 9:36 PM, Carman wrote:
>> My plan is to drill a hole in the bottom of the monkey and in the  
>> top of the
>> pitman and insert a "top pin" in the top of the pitman.
>> I'm thinking that the hole in the bottom of the monkey should be a  
>> little
>> oversized to allow a fraction of fore-and-aft motion in the monkey.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090705/983f0d2f/attachment.htm>