They are hanging right in front of the damper springs, which you can't see very well. David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: "Keith McGavern" <kam544 at allegiance.tv> To: pianotech at ptg.org Received: 7/6/2009 10:59:33 AM Subject: Re: [pianotech] Interesting action on Yamaha YUA >On Jul 5, 2009, at 4:59 PM, Ryan Sowers wrote: >> The springs are flat, about 1/8" wide and do not engage the hammer >> butt until the hammer is about 5/8ths or so from the strings. >Ryan, >Looking at the pic you sent, I am having a little bit of trouble >identifying these springs, so I ask: >Is the small green area the part that engages the hammer butt where >the goldish leather appears on the hammer butt? >Keith
This PTG archive page provided courtesy of Moy Piano Service, LLC