Washers...good idea. I'm always fighting to tighten those babies... David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: "Joseph Garrett" <joegarrett at earthlink.net> To: pianotech at ptg.org Received: 7/6/2009 3:54:26 PM Subject: [pianotech] Re.: refilling 1/3 lb. spools >Conrad Said: "Yup, that's why I only use 1# canisters..." >Right! Real convenient to carry 30 Pounds of wire with you out in the field! Sheesh! >Yes, 1# cans are the way to go in the shop. Fill the 1/3 lb. ones from the 1# cans. >The biggee is....make sure you have the "Brake" on the 1/3 lb. spools. Also bend the >"tongue" of the Brake upwards so that the wire binds against the bend before it >comes out of the ent of the "tongue"!!! Also, put washers and either side of the >spool when you attach the "Brakes", that way you can cinch down on the pivot bolt >and control the amount of resistance. The heavier the wire, the more resistance you >need to avoid the "explosion"....DAMHIK!!! >Regards, >Joe >Joe Garrett, R.P.T. (Oregon) >Captain, Tool Police >Squares R I
This PTG archive page provided courtesy of Moy Piano Service, LLC