Bill Spurlock's website has some good info on key bushing: http://spurlocktools.com/id46_technical_tips_1.htm By the way, are you doing the front rail too? That would make the most sense. Good luck! On Sat, Jul 11, 2009 at 3:00 PM, Matthew Todd <toddpianoworks at att.net>wrote: > I will be doing a balance rail bushing job soon, and just wanted to see how > replacing the balance rail differs from replacing the front rail, i.e., the > key buttons. I am assuming I can take off the old ones using steam. And > then, what would be the best cauls to purchase. > > Thank you for the advice, > > ***TODD PIANO WORKS* > Matthew Todd, Piano Technician > (979) 248-9578 > http://www.toddpianoworks.com > -- Ryan Sowers, RPT Puget Sound Chapter Olympia, WA www.pianova.net -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090711/c3d1701f/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC