Thanks David and Joe (Captain) for the dent puller idea. Now I've got two fine instrument repair tools to purchase at Autozone - a dent puller and a 5 foot length of brake line tubing. :) -Court On Wed, Jul 15, 2009 at 6:15 AM, Bruce Browning - The Piano Tuner < justpianos at our.net.au> wrote: > Hi List, > Has anybody tried something similar to this for pulling/lifting tuning > pins that have been pounded into the block too far. > I'm thinking this could improve the "look" and function before CA > treatment. > Bruce Browning > The Piano Tuner. > > > > Since an olde friend invented this system years ago, I can answer with a > > better solution. > > Keep the original adjusting bolt w/knob, just weld another nut onto it. > > (one that will match up with a cheapie fender puller, from your local > > automotive parts house.) Ready made for pulling bridge pins, key pins and > > nose hairs > > > > I got a dent puller from an auto parts store, same idea, fit right into > > the vise grips.... > > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090715/0fe8c9be/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC