Spray first with accelerator, wait a minute, then a tiny drop of thin CA on all the joints. Problem solved. Dean Dean May cell 812.239.3359 PianoRebuilders.com 812.235.5272 Terre Haute IN 47802 -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Clark A. Sprague Sent: Saturday, July 25, 2009 8:35 PM To: pianotech at ptg.org Subject: [pianotech] Old Kranich and Bach Grand Hi, all! It sure was nice to see a lot of you at Grand Rapids, and to put faces with names. What a great resource this list is. That said, I went to an old Kranich and Bach grand today, that had the board shimmed, new pinblock, new hammers with shanks and flanges. But, alas, not new whippens. The old things are letting go glue joints, notably the jack tenders. Whoever did the job meticulously replaced all those notorious little spring cords, but now glue joints are failing. Having talked about new whippens with the customer, nothing in the Renner kit works, or the Pianotek catalog, or the new WNG kit so graciously given out in GR. It seems that the K&B whip is shorter in the distance from the flange center to the jack center. Anybody ever modify whips to accomplish the task? Or what? Besides the obvious answer of a match and some flammable liquid! Customer seems to want to spend the money. Clark A. Sprague, RPT csprague4 at woh.rr.com
This PTG archive page provided courtesy of Moy Piano Service, LLC