Nose of the molding? Bottom back end? top middle? David Ilvedson, RPT Pacifica, CA 94044 ----- Original message ---------------------------------------- From: wimblees at aol.com To: pianotech at ptg.org Received: 6/4/2009 6:27:36 PM Subject: Re: [pianotech] brightening the hammer tone > I've heard of shoulders, heads, and crowns, but never a nose. What area do >you consider to be the nose? >Wim >-----Original Message----- >From: Brian Doepke <bdoepke at verizon.net> >To: pianotech at ptg.org >Sent: Thu, 4 Jun 2009 2:14 pm >Subject: [pianotech] brightening the hammer tone >Hello, > >Did I just read somewhere that the tone of the hammers may be brightened by >adding lacquer at the ânoseâ of the molding? > >Can that be done on all hammers or just certain types? > >Thank you > >Brian P. Doepke, RPT >A.A.A. Piano Works, LLC >Piano Tuning + Service >www.aaapianoworks.com >Â
This PTG archive page provided courtesy of Moy Piano Service, LLC