I went to pitch raise/tune a new clients piano today. The piano is a Wurlitzer Console. Almost the entire treble section was sluggish upon return of each key. So I began my investigative process. I held the key with one hand and moved the hammer with the other. It returned just fine. I then held the key and moved the backcheck, and it returned fine. I thought maybe tight balance rail bushings. So I eased a sample key, but it did not good. I could not figure out what the problem was. Any help please? TODD PIANO WORKS Matthew Todd, Piano Technician (979) 248-9578 http://www.toddpianoworks.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090605/3bdc10ef/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC