Julia, I don't know, because I have never done it that way. I fill the hole with epoxy mixed with filler or sanding dust, then re-drill. Al From: KeyKat88 at aol.com Sent: Saturday, June 06, 2009 9:39 PM To: pianotech at ptg.org Subject: [pianotech] Does shank glue fill affect voicing? Greetings, If in a hammer replacement job, one hammer,s bore angle is unintentionally bored at the wrong angle, and so to remedy it you make the hole alittle larger to get the correct angle and its filled in with glue, (or glue and sawdust mix) will that hammer sound different than its neighbors who have the better fit and proper glue? Curious. Thanks, Julia Reading, PA ------------------------------------------------------------------------------ Stay connected and tighten your budget with a great mobile device for under $50. Take a Peek! -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090607/697ddb19/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC