Allan, I made mine. Piece of old brass pedal rod, cut to length, drill two holes for the top end of the wire, insert wire and bend over to lock. Add a rubber foot, file a little groove in the top and buff to smooth the edges and you're in business. William R. Monroe On Fri, Jun 12, 2009 at 10:09 AM, Allan <allan at sutton.net> wrote: > Thank you Paul and William. The tool in the pictures is different from > the tool sold by Mother Goose, which doesn’t show a rubber “foot”. Is it > available for sale somewhere or should I just try to make one? > > > > Allan Sutton > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090613/b6be2f6c/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC