Laura, Check the strings between the hitch pins and the bridge: if you put your hand on the strings there, and the ringing stops, then just put in some braiding. William Especially the bass. ----- Original Message ----- From: Laura Read To: pianotech at ptg.org Sent: Saturday, June 13, 2009 9:44 AM Subject: [pianotech] Ringing on I am working on an old Haines Bros. 5' grand with lots of issues, including significant cracks in the soundboard, but I don't have a clue why the sound is ringing on. I have regulated the dampers, which apparently were replaced a few years back, but even when I put my hand down on the strings I can't stop the sound. Any ideas? Thank you, Laura -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090614/a2c01239/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC