I set the upstop to the proper height and set the capstan stop to keep the pedal from going too far. Still hitting the backcheck wire on 6 or so keys. Sent from my iPhone On Jun 15, 2009, at 7:05 PM, J Patrick Draine <jpdraine at gmail.com> wrote: > Does the key upstop rail allow the dampers to lift higher than > appropriate? Is there a bolt (which you can adjust) or felt shim for > the sustain pedal lever to prevent it from traveling too far? > Good luck, > Patrick > > On Mon, Jun 15, 2009 at 5:56 PM, Richard <richard.ucci at att.net> wrote: > List, > I have a Sojin grand with damper spoons in the levers that are > hitting the backcheck wires when the sustain pedal is used . Moving > the action forward is not an option. > Best solution? > > Sent from my iPhone > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090615/232010a4/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC