>> >Check the fore/aft position of the dowel capstan under the >> >wippen. Too far back, it will feel heavy. Bend the wire >> >a bit toward the front (of the piano), it will feel lighter. >That will also get it out of the wippen felt divot... It will also decrease the ratio and the jack might not move sufficiently from under the butt. It might be a solution however if a balance between key dip, let off and hammer blow can be juggled for adequate regulation. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090627/561b10b1/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC