[pianotech] FW: Re: Damper lift adjustment

David Ilvedson ilvey at sbcglobal.net
Mon Jun 29 15:59:16 MDT 2009


List...

>From the horse's mouth:

"Hi David,
 
Yes, same no difference.
 
Bill"

----- Original Message ----- 
From: David Ilvedson 
To: orders at spurlocktools.com 
Sent: Monday, June 29, 2009 10:06 AM
Subject: damper jig


Hey Bill,
 
Would I use your underlever leveling gauge exactly the same if I have a Yamaha with felt on the underlevers instead of the keys?
 
David Ilvedson, RPT
Pacifica, CA 94044


David Ilvedson, RPT
Pacifica, CA  94044

----- Original message ----------------------------------------
From: "Scott Helms, RPT" <tuner at helmsmusic.net>
To: ilvey at sbcglobal.net; pianotech at ptg.org
Received: 6/29/2009 2:24:05 AM
Subject: Re: [pianotech] Damper lift adjustment


>Richard,

>Since the jig is designed to automatically set the proper lost motion
>between the back of the key and the damper lever, it shouldn't matter
>whether the felt is on the key or on the lever - space is space,
>regardless of whether the "cushion" is at the top of the space or the
>bottom. So I would use the jig exactly as you would on any other piano -
>set the bottom of the rail to lie on the back of the key at rest, then set
>the damper levers at the height of the top of the rail.
>-- 
>Scott A. Helms, Registered Piano Technician
>www.helmsmusic.net






>> I would find some samples that have the correct damper lift with key, then
>> use the Yamaha method using the damper tray to level the underlevers, i.e.
>> turn up pedal rod and bring tray up to sample and loosen all other
>> underlevers and retighten, etc.   Probably what they did in the factory...
>>
>> David Ilvedson, RPT
>> Pacifica, CA  94044
>>
>> ----- Original message ----------------------------------------
>> From: Richard <richard.ucci at att.net>
>> To: pianotech at ptg.org
>> Received: 6/28/2009 1:35:48 PM
>> Subject: [pianotech] Damper lift adjustment
>>
>>
>>>List,
>>>This 1967 Yamaha g-3 has no key end felt as you can see. The damper
>>>levers have red felt like butt felt on the underside.
>>>Where should I set my Spurlock damper jig?
>>
>>
>>
>>
>>>Sent from my iPhone
>>
>>


More information about the pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC