On 3/4/09, wimblees at aol.com <wimblees at aol.com> wrote: > David > > There might be other compelling reasons, but I presume it's a matter of > cost. It is less expensive to harden the capo, than to do the routing, and > purchase, and cut the steel rods. > > As far as you doing this, I guess there is no reason why you can't try it, > provided you have a router and tip, and the ability to do the work. Any 1/8" > hardened steel rod should work. Maybe someone has some old Kimball rods to > spare. Or Mehlin... -- Conrad Hoffsommer, RPT Luther College Decorah, IA
This PTG archive page provided courtesy of Moy Piano Service, LLC