That's the problem. Though it may not be the right hammer in terms of weight for the C5 anyway. David Love www.davidlovepianos.com From: David Ilvedson [mailto:ilvey at sbcglobal.net] Sent: Wednesday, March 11, 2009 7:08 PM To: davidlovepianos at comcast.net Subject: RE: [pianotech] Replacing Hammers on a Yamaha C5 No they won't. C7 hammers...probably David Ilvedson, RPT Pacifica, CA 94044 _____ Original message From: "David Love" To: "'David Ilvedson'" , Received: 3/11/2009 7:06:38 PM Subject: RE: [pianotech] Replacing Hammers on a Yamaha C5 The problem may be that they won't provide prehung CFIII hammers for a 1978 C5. Worth asking though. David Love www.davidlovepianos.com From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of David Ilvedson Sent: Wednesday, March 11, 2009 6:53 PM To: pianotech at ptg.org Subject: Re: [pianotech] Replacing Hammers on a Yamaha C5 Yamaha just replaced the hammers on the CFIII we use at the Opera House/SF Ballet and those are awesome hammers...David Reed did the work...acetone/keytop on the bottom 7 hammers or so and the top 7 hammers or so...I've got no problem with CF hammers... David Ilvedson, RPT Pacifica, CA 94044 _____ Original message From: erwinspiano at aol.com To: pianotech at ptg.org Received: 3/11/2009 6:46:53 PM Subject: Re: [pianotech] Replacing Hammers on a Yamaha C5 Mike Well the first question is what kind of tone is desired & some one must first have an opinion as to what it should be. I know, I know... this is a broken record but I've used predominatly Lower density hammers on most asian pianos with enormous success. If this was a Yamaha 9 ft I would suggest Renners with Weickert special felt when they come out.This belly & string scale requires denser hammers in my experience. The smaller pianos like this are a fine candidate for the Wurzen AA or Weickert special. Dale I was approached by a local school district about regualating their Yamaha C5 which is in a classroom and used a minimum of 5 hours daily. The piano was new in 1978 and the hammers appear to have never been shaped. For a number of years it was kept on the stage in a closet reserved for it and used minimally. about 9 or 10 years ago it was moved to the classroom and has remained there ever since. The hammers could be shaped but with the use they get would not last more than a few years and they are marginal for shaping anyway. I checked with Yamaha, I recalled that they used to offer a fairly low price on hammers mounted on shanks with flanges, the current price is $1400 and change. This is a public school and price is a concern however doing the job correctly is of a deeper concern for me. My concern is, putting new japanese hammers on a piano of this age, since it isn't being restrung. For a few hundred more I could replace the shanks/flanges and replace the hammers with after market like Abels or Ronsens. I fully intend to rebush keys as necessary, bolster backchecks do any other necessary repairs and regulate after the hammer replacement. My reason for posting is, I'm looking for feedback and suggestions from those who are experienced with hammer replacement on asian pianos of or nearing this age, agree or disagree. Mike -- I intend to live forever. So far, so good. Steven Wright Michael Magness Magness Piano Service 608-786-4404 www.IFixPianos.com <http://www.ifixpianos.com/> email mike at ifixpianos.com _____ Worried about job security? Check <http://jobs.aol.com/gallery/growing-job-industries?ncid=emlweuscare00000001 > out the 5 safest jobs in a recession. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090311/23920956/attachment-0001.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC