[pianotech] key position at rest

PAULREVENKOJONES at aol.com PAULREVENKOJONES at aol.com
Sun Mar 15 18:04:43 PDT 2009


Thanks, Jon.
 
P
 
 
In a message dated 3/15/2009 7:51:07 P.M. Central Daylight Time,  
jonpage at comcast.net writes:


M&H has  that: 15/16" to the bottom of the  key.

>From  where?



M&H.  I was sent to diagnose a problem with a new piano.
For some reason, the keys were higher than the front rail
pins and they supplied that info.


I forget the exact solution but that measurement is noted in my
Action Handbook, I don't service the piano.  i think it had a
Pianomation retrofit too.

Regards,

Jon  Page


**************A Good Credit Score is 700 or Above. See yours in just 2 easy 
steps! 
(http://pr.atwola.com/promoclk/100126575x1220439616x1201372437/aol?redir=http:%2F%2Fwww.freecreditreport.com%2Fpm%2Fdefault.aspx%3Fsc%3D668072%26hmpgID
%3D62%26bcd%3DfebemailfooterNO62)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090315/b1772947/attachment.html>


More information about the pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC