>**** I believe that I will solve geometry by decreasing action spread by 2mm >from 113 to 111 - this will give me adaquate >blow distance. Then I will move the capstans back by 3mm - this will give >back most of the leverage that will be lost by >shortening spread and allow the whippen heals will completely cover the capstans. Don't sign on to moving the rail forwards and the capstans. Make a trial capstan like the one that appears in the forefinishing.pdf file. Remove a capstan and experiment. Check the touchweight and regulation with different executions. -- Regards, Jon Page -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090316/2460af56/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC