[pianotech] ideal shop size

[erwinspiano at aol.com]

?Hey AL
? This is a great size building for one or two people. I worked in one that size for many years. Now it's 3 K ft. Some folks would say that's not enough but that wouldn't be Trix.
? SO when are you doing that Steinway Hammer vocing class zzzactly? Hmmm?
? Dale






My shop is 40'X28' and?works for me.?Whatever size you select, I would make it in two separate sections. One side for dirty work. Sawing, sanding, drilling, (polishing polyester <G>) with good dust control. The other for regulating, stringing, damper work, storage, etc. I can work?on 4 pianos in my space, but no more than that.

?

Al

?



From: William Monroe 

Sent: Friday, March 20, 2009 11:00 PM

To: pianotech at ptg.org 

Subject: Re: [pianotech] ideal shop size




Hey John,

Mine is 20x40 and it's tight, but workable.? I've got four instruments set up right now - M, O, 5' no name, and a 9'.? Three would be more reasonable, but it works.? I'd sure be happy to have say a 15 x 15 or so finish room.? I'd say shoot for 1000 sq. ft. and maybe a finish room.? More later, gotta go to bed.

William R. Monroe



On Fri, Mar 20, 2009 at 8:48 PM, John Formsma <formsma at gmail.com> wrote:

Looking for input on the ideal size for a workshop for my needs. 



What I am projecting (in the future) is no more then three people working in the shop at any one time, and probably no more than two people. For the present time, it would be only me, with no more than two or three projects going on at the same time.




Complete rebuilding is where I want to end up, but do not plan on doing refinishing myself. But it might be good to have a small room that could be kept relatively dust-free -- just in case some spraying needs to be done.




Any thoughts on the number of square feet a shop like this would need? I have proven again and again that I can easily fill up whatever space I have <G>, but I'd like to keep things as efficient as possible.




What are things that you wish you had in your shop, or things you wish you had done differently when planning and/or building a shop?





Thanks in advance,

-- 
JF









-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090321/256985cd/attachment.html>