Julia- Way to go! Ed S. ----- Original Message ----- From: KeyKat88 at aol.com To: pianotech at ptg.org Sent: Tuesday, March 24, 2009 7:53 AM Subject: [pianotech] Yamaha U3 - How I got fiber out of my butt flange Greetings, Ethyl alcohol dropped off an eye dropper, not even a drop per flange side. Leave on for about a minute (it will soak in). Then I used a safety pin and starting at the bottom of the slot, the broken fiber sides right out Julia Reading PA In a message dated 3/22/2009 9:21:08 P.M. Eastern Standard Time, tunerryan at gmail.com writes: 7. Tilt action 90=B0 so that the hammer flange cord slots face up 8. Using specially adapted shimming chisel, clean slots and vacuum up = debris ------------------------------------------------------------------------------ Feeling the pinch at the grocery store? Make dinner for $10 or less. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090324/ae6cd1ce/attachment.html>
This PTG archive page provided courtesy of Moy Piano Service, LLC