[pianotech] CA glue vs. PinTite or Garfield's

Jeff Deutschle oaronshoulder at gmail.com
Wed Mar 25 05:03:36 PDT 2009


I have used CA only once and do not plan on using it again. As Mr.
Foote mentioned the feel is different between CA treatment and
Garfield’s. I prefer the Garfield feel. With the CA there was no
“spring” left in the pin. And with poor rendering due to rust, which
can be expected on a piano that needs the treatment anyway, I had to
resort to flagpoling the pins in order to render the strings and the
result was not as stable as I would have liked. Both types of
treatment will make a piano tunable, but Garfield’s does not have the
odor. One change I have made in the application is to rinse the coils
with denatured alcohol after application to make sure that there is no
glycerin left to attract moisture and promote rust on the strings.

-- 
Regards,
Jeff Deutschle

Please address replies to the List. Do not E-mail me privately. Thank You.



More information about the pianotech mailing list

This PTG archive page provided courtesy of Moy Piano Service, LLC