[pianotech] agraffe leveling

[Joe And Penny Goss]

Tried to count the 0000000000000000's but with all thosr trillions floating arround, well-------------
I think you got my intent.
Joe Goss RPT
Mother Goose Tools
imatunr at srvinet.com
www.mothergoosetools.com
  ----- Original Message ----- 
  From: paul bruesch 
  To: pianotech at ptg.org 
  Sent: Saturday, March 28, 2009 5:40 AM
  Subject: Re: [pianotech] agraffe leveling


  Business card would be about .010" and paper .003" (i.e. ten thousandths and three thousandths... you had one thousandth [ten ten-thousandths] and three ten-thousandths). Hence half those numbers would correctly be .005" and .0015"

  Paul Bruesch (former machinist geek)
  Stillwater, MN



  On Fri, Mar 27, 2009 at 11:22 PM, Joe And Penny Goss <imatunr at srvinet.com> wrote:

  <snip> 

    Business card about .0010"  paper .0003"  
    So taking a little liberty with these measurments and knowing that the foot rests on only about half its width, one is trying to level the strings to a very narrow target of less than .00005 to .0001"
  </snip> 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090328/686366f5/attachment-0001.html>