Jeff Unfortunately this does not have the standard rail. It is a flat rail with a small square alignment rail on top, a precursor to the metal rods that some of the action makers use to keep flanges lined up. The other problem is the distance between the bushing holes is less than in the current double flanges from Steinway. Rex Roseman -----Original Message----- From: Jeff Deutschle [mailto:oaronshoulder at gmail.com] Sent: Wednesday, April 29, 2009 7:45 AM To: pianotech at ptg.org Subject: Re: [pianotech] 1867 Steinway Upright Just replaced a few double flanges on an old steinway upright. The parts from Schaff worked after shaving just a bit from the birds eye "boss". This has the standard steinway action rail. Does yours?
This PTG archive page provided courtesy of Moy Piano Service, LLC