[pianotech] sanding YC brackets

[Tom Driscoll]

Wim,
They will never become stable. If you were able to get the rails in correct position they would'nt stay that way for long.
Tom Driscoll

From: wimblees at aol.com 
  To: Pianotech at PTG.org 
  Sent: Saturday, May 09, 2009 3:45 PM
  Subject: [pianotech] sanding YC brackets


  I am still waiting for YC to send me new brackets. So I got to thinking, what would happen if I grind off a 1/4" from the feet of the brackets? 
  Willem (Wim) Blees, RPT
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech_ptg.org/attachments/20090509/74b30867/attachment.html>