Ah--of course. I'm still wondering why the hammers were off the rail. It doesn't happen often (except on those pianos where it happens seasonally) and I'm always a little alarmed when I see it. br ----- Original Message ----- From: "Jeff Deutschle" <oaronshoulder at gmail.com> To: pianotech at ptg.org Sent: Monday, May 11, 2009 9:39:26 AM GMT -06:00 US/Canada Central Subject: Re: [pianotech] Hammer Line Issue Barbara: The hammer rail wasn't moved back, the action was swung out. I guess this created some lost motion. Then bobbling hammers was brought up and the thread went south to the damper springs. On Mon, May 11, 2009 at 10:18 AM, Barbara Richmond <piano57 at comcast.net> wrote: > I haven't been following too closely, and maybe someone brought this up, but > how would moving the rail back make hammers--that were already off the > hammer rail--rest on it? > > > > First, what was the pattern of hammers off the rail? > > > > Then I could rule out possibilities--- > > > > 1. The hammer rest rail cushions need beefing up. > > 2. Climate change affecting the keybed. > > 3. Critters or something else screwing around with/rearranging/leaving extra > stuff on/ the back rail felt. > > 4. Somebody (who didn't know what they were doing) was in there trying to > adjust the capstans. > > > > ??? > > > > I'd have to go back and read to figure out how we got to the damper spring > thing. But, yes, Ed, even really, really strong damper springs have been > neglected by technicians for eons--at least in my neck of the woods. > > > > Barbara Richmond, RPT > > near Peoria, Illinois > > > > > > > > ----- Original Message ----- > From: "Ed Sutton" <ed440 at mindspring.com> > To: pianotech at ptg.org > Sent: Monday, May 11, 2009 4:15:20 AM GMT -06:00 US/Canada Central > Subject: Re: [pianotech] Hammer Line Issue > > > > Here's Matthew's first post: > >>I went to tune a clients piano today. It is a Kawai Console, year 1986. > >>The very first thing I noticed was the hammer line was totally screwed up. >> Some of the hammers were resting on the rail, and others were off the >> >rail. I unscrewed the action bracket nuts and pulled the action back a >> little until all the hammers were resting on the rail. " > > What is the likelihood that the piano had overly strong damper > flanges, un-noticed for 22 years ? The customer didn't complain of bobbling > hammers. That problem occurred after Matthew adjusted the capstans and > let-off. We are into the second or third stage of treatment without > diagnosis. > > ES > > -- Regards, Jeff Deutschle Please address replies to the List. Do not E-mail me privately. Thank You. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090511/2e14c9b1/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC