Sometimes the cheek block screws are on the inside of the cheek blocks underneath the end keys running parallel to the key bed. Don't know on this piano. David Love www.davidlovepianos.com From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Paul T Williams Sent: Wednesday, May 13, 2009 2:41 PM To: pianotech at ptg.org Subject: Re: [pianotech] Cheek Block removal question... Can you remove the fallboard with the little screws on the ends? Take that off and then you'll find the cheek blocks will have a screw on the back of them screwed into the keybed. Paul "Larry Trischetta" <ltpianoman at comcast.net> Sent by: pianotech-bounces at ptg.org 05/13/2009 04:12 PM Please respond to pianotech at ptg.org To <pianotech at ptg.org> cc Subject [pianotech] Cheek Block removal question... Hi...I'm trying to find out how to remove the cheek blocks (for action removal) on a 1986 Story & Clark baby grand ser.# 901037. There are no screws underneath and nothing under the rubber button on the cheek block. Also, there are no screws under the key slip. Maybe I need new glasses. Thanks for any help offered. Larry Trischetta, Pocono NE Chapter -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090513/c067f30d/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC