Right. That's why I was so happy to adopt Dave Davis's recommendation of using the ratcheting straps. (I searched the archives and can't find the pictures.) I still have those useless clamps--in fact, I've been cleaning up my garage, found them, and wondered if there was something they might be useful for. Any ideas? Or should I take them to be recycled? It's always a plus to get rid of something... Barbara Richmond, RPT near Peoria, Illinois ----- Original Message ----- From: "Conrad Hoffsommer" <hoffsoco at luther.edu> To: pianotech at ptg.org Sent: Thursday, May 14, 2009 7:24:32 AM GMT -06:00 US/Canada Central Subject: Re: [pianotech] Upright Tilter On 5/14/09, Barbara Richmond <piano57 at comcast.net> wrote: > > > I don't take the straps around the piano, but secure the tilter to the piano > via the back posts. You can draw up the tilter nice and tight to the piano > that way. Wish I had a picture. > So you put the straps where those useless clamps which come with the folding tilter are supposed to go, right? w/o modification those things slip right out from behind the posts. -- Conrad Hoffsommer, RPT - Keyboard Technician Luther College, 700 College Dr., Decorah, Iowa 52101-1045 1-(563)-387-1204 // Fax 1-(563)-387-1076 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090514/9f92f19f/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC