You may need longer screws as Terry said, and you may need to tap the threads to get the old ones to work in the hole. At least that is what I had to do a few months ago on a YC grand action bracket replacement. Will Truitt From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Farrell Sent: Friday, May 15, 2009 4:45 PM To: pianotech at ptg.org Subject: Re: [pianotech] Young Chang Bracket replacement Won't hurt to try them. My recollection is that the base of the new brackets is thicker than the originals and you will need longer screws. But just stick the ones you have in there and see if enough protrudes..... Terry Farrell ----- Original Message ----- From: CHARLES BECKER <mailto:cbeckercpt at verizon.net> To: Pianotech List <mailto:pianotech at ptg.org> Sent: Friday, May 15, 2009 9:46 AM Subject: [pianotech] Young Chang Bracket replacement My bracket replacements did not contain any screws. Am I hoping for too much in thinking the originals will work? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20090515/4d9f4760/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC