Hi Conrad: I used to have a loop making machine, but it is easy to overstress the wire making the loop (at least that was my experience lo these many years ago), and have them break. I simply use an appropriately sized nail or pin bent into the shape of an L and tacked into the side of my workbench. My suggestion is to practice making 20 or 30 loops before you make them for real for the Schimmel. Make the loop, snip it off at the end, make another, etc. etc. You won't use that much wire, and I think you will be surprised how quickly you learn to make a very nice and consistent coil. Will Truitt -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Conrad Hoffsommer Sent: Friday, May 22, 2009 9:28 AM To: Pianotech List Cc: College and University Technicians Subject: [pianotech] Double loop German stringing Folks, We recently acquired a well used Schimmel grand which will need almost everything. (Yes, it was also very cheap) When the time comes to restring, I'll be faced with 68 unisons of individual strings. It has the German style loops with a double wrap around the hitchpin. I've got no problem doing the single wrap slip knot, and I'm sure I could figure out a way to make the doubles look good, but as I'm not into reinventing the wheel, I wonder how others have dealt with this. Do you make up a jig, just use a nail on the workbench, or what? -- Conrad Hoffsommer, RPT - Keyboard Technician Luther College, 700 College Dr., Decorah, Iowa 52101-1045 1-(563)-387-1204 // Fax 1-(563)-387-1076
This PTG archive page provided courtesy of Moy Piano Service, LLC