[pianotech] Schaff Key Recovering

[Al Guecia/AlliedPianoCraft]

I agree with Mike here. Go directly to the source. I tried Schaff once and 
was very unhappy with the results. They used a circular saw to remove the 
old key tops and cut too far down into the key. Never again.

Al


--------------------------------------------------
From: "Mike Spalding" <mike.spalding1 at verizon.net>
Sent: Saturday, November 14, 2009 7:59 AM
To: <pianotech at ptg.org>
Subject: Re: [pianotech] Schaff Key Recovering

> Matthew,
>
> "changed sources" is the key.  They don't do it themselves, they send it 
> out, probably to someone you could also send it out to.  I prefer to deal 
> directly with the person/company doing the work, develop a business and 
> personal relationship with them.  How can a middleman not add cost, delay, 
> and opportunities for miscommunication?
>
> Mike
>
> Mike Kurta wrote:
>>    According to Schaff Piano, they have changed sources for their key 
>> recovering and should result in shorter turnaround time and improved 
>> quality.
>>    Mike Kurta
>>
>