[pianotech] Yamaha G1 - Loose under lever lead

[Al Guecia/AlliedPianoCraft]

Joseph, how did you shape it? Point, cross cut?

David, Paul, I couldn't find a photo of the Renner. How is that one shaped?

I want to make my own. I'll probably never use it again. 69 yo and pushing retirement. Maybe<G>

Al

  From: Joseph Alkana 
  Sent: Thursday, November 19, 2009 1:53 PM
  To: pianotech at ptg.org 
  Subject: Re: [pianotech] Yamaha G1 - Loose under lever lead


  I used to use an old set of under the key easing pliers and inset two set screws into the 'jaws' of the pliers facing each other for this troublesome issue. Worked great, as the mechanical advantage of the pliers allowed nice control over the squeeze I applied.

   

  Joseph Alkana RPT (Retired)

   


------------------------------------------------------------------------------

  From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of PAULREVENKOJONES at aol.com
  Sent: Thursday, November 19, 2009 10:39 AM
  To: pianotech at ptg.org
  Subject: Re: [pianotech] Yamaha G1 - Loose under lever lead

   

  Renner has a set of pliers, I think, and Don Bee, Jr. here in Chicago designed a plier for exactly this purpose several years ago. 

   

  Paul

   

  In a message dated 11/19/2009 12:24:37 P.M. Central Standard Time, AlliedPianoCraft at hotmail.com writes:

    Hi All,

     

    I've got a Yamaha G1 with loose under lever leads. I'd like to make up some kind of pliers that I can use to expand the under lever lead to stay in place. Any thoughts would be very helpful.

     

    Thanks,

     

    Al

     

     
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091119/aa8daf1e/attachment.htm>