The coils are not tight together and the beckets are not consistent. Unless it's the picture, the tops of the tuning pins do not look even either. Some pins appear to high and others to low. From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of PAULREVENKOJONES at aol.com Sent: Thursday, October 01, 2009 11:05 AM To: pianotech at ptg.org Subject: Re: [pianotech] Pin height Is that a thread or a promise? P In a message dated 10/1/2009 7:50:25 A.M. Central Daylight Time, richard.ucci at att.net writes: Nice neat job, but kinda high. Ru/up Rick Ucci/ Ucci Piano _____ avast! Antivirus <http://www.avast.com> : Outbound message clean. Virus Database (VPS): 091001-0, 10/01/2009 Tested on: 10/1/2009 9:29:03 PM avast! - copyright (c) 1988-2009 ALWIL Software. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091001/46cc42b0/attachment-0001.htm> -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/jpeg Size: 153801 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech.php/attachments/20091001/46cc42b0/attachment-0001.jpeg>
This PTG archive page provided courtesy of Moy Piano Service, LLC